+7 (812) 702-12-62
русский

Search

Documentation
+7 (812) 702-12-62
русский

ELM PS 110 (220) kV

ELM PS Block-type prefabricated substation is a design-configurable platform that integrates a set of fully factory-ready functional modular components with power, control, and communication equipment developed by specialists at "Electronmash" JSC to create transformer substations with various combinations of network voltages of 220/110/35/10/6 kV.

>13
products manufactured and delivered to Customer sites

Main advantages

01

Maximum security level

02

High reliability and quality of PS

03

Reduction of commissioning time

04

Capital Cost Reduction (CAPEX)

05

Design features of KTPB

06

Monitoring, diagnostics and management

01 Maximum security level

PS planning solutions and the very organization of modular components make it possible to organize a safe, ergonomic production environment for equipment and personnel. The design of the modular components ensures the safe connection of cable, overhead lines and switchgear connections to transformers, reliable mechanical and electrical interlocking systems eliminate incorrect switching of switching power equipment and ensure the maximum level of personnel safety during maintenance and repair of equipment.

02 High reliability and quality of PS

The high reliability of the electrical equipment used in the Outdoor switchgear, Indoor switchgea and Substation control room, developed taking into account the specifics of operation at Russian and foreign power facilities, is confirmed by test reports in independent test centers. A specially designed design of power units using high-quality components and an efficiently organized, well-established production process with step-by-step quality control in the factory make it possible to provide the Customer with reliable PS electrical equipment suitable for any special project requirements.

03 Reduction of commissioning time

PS components make it possible to transfer most of the construction, installation and commissioning work to the site of the manufacturing plant, and only install modules, complete commissioning and commissioning at the facility. The flexible modular design allows you to change the location of the PS components or their modules, dismantle them, as well as quickly load and unload the modules using standard loaders. The availability of a list of developed standard modules will ensure the preparation of design documentation for the execution of operational design in the shortest possible time.

04 Capital Cost Reduction (CAPEX)

The use of optimal architectural, hardware and layout solutions in PS makes it possible to reduce capital costs for construction (CAPEX). Due to the compact placement of all substation equipment, it is possible to significantly reduce the building area of the KTPB, while reducing the cost and time for transportation by standard methods is ensured by the permissible dimensions and weight of the modules. All this ensures the minimum payback period for the project for the Customer in combination with the long service life of the PS-ELM equipment.

05 Design features of KTPB

Detailed technological study of the product design makes it possible to manufacture various substation versions: modular type with Substation control room, modular type with Indoor switchgear. A two-storey design of the modules is possible with the placement of the control room on the 2nd floor in conditions of a shortage of free space allocated for the PS, while the reinforced all-welded steel structure ensures 100% rigidity of the Indoor switchgear and control room modules, reduces requirements and significantly simplifies the installation of modules on various types of foundation bases.

06 Monitoring, diagnostics and management

The automated process control and telemechanics system of KTPB substations are based on modern hardware and software in strict accordance with the design and/or working documentation and Customer requirements, while there are a number of standard solutions for substation automation based on the principle of distributed topology of information collection and transmission using standard international digital data transmission protocols IEC 61850, 60870-101/104 and others, as well as modifications for digital substations. All PS equipment is equipped with monitoring, control and diagnostic systems for predictive maintenance of electrical equipment at the power facility.

Modifications of ELM PS 110 (220) kV

Get the cost calculation

-01

Модульные ПС с ОРУ 110(220) кВ

ELM-MPS 110(220) kV

Modular PS with outdoor switchgear rated at 110(220) kV
and external installation of power transformers

 

-02

Модульные ПС с ЗРУ 110 220 кВ

ELM-MPS 110(220) kV

Modular PS with indoor switchgear rated at 110(220) kV,
featuring external installation of power transformers or placement of transformers in a prefabricated building

-03

Мобильные модульные ПС 110 220 кВ

ELM-MPS 110(220) kV

Mobile modular PS rated at 110(220) kV,
with all equipment placed on a mobile wheeled chassis, including power transformers

All photos

Information
materials

Краткая информация КТПБ-ELM 110 кВ

Download document

Documentation

Get a consultation

Licenses and certificates

01

Certificate of compliance with industrial safety requirements for KTP-ELM with a capacity of up to 6300 kVA and a voltage of up to 35 kV inclusive Declaration of Conformity: Transformer substations of the complete block ELM brand, voltage from 35-110 kV Certificate of block-type prefabricated substations BPS ELM compliance with industrial safety regulations voltage from 35 to 110 kV

Delivery sites where used ELM PS 110 (220) kV

PS 110/35 kV SPP "Laganskaya"

All Customer's sites

Unigreen Engineering LLC

Region

Renewable energy

2023

The natural potential for the development of renewable energy in Kalmykia is one of the most promising in Russia. Solar power plants help to reduce dependence on traditional energy sources and contribute to the creation of new jobs, which has a positive impact on the economy and social infrastructure of the Republic. During the construction of the Laganskaya SPP, about 200 jobs were created in total, and 40 more will be added during operation.

Hide

Open

Equipment

KTPB 110/10 kV complete transformer substation in a block-modular building. 

The general contract includes a full range of works on the creation of the facility: the organization of construction and construction camp, design, construction and electrical installation, supply of electrical equipment, commissioning, execution of executive documentation in accordance with the approved technical requirements of the Customer, as well as the commissioning of the facility.

Show more

Service we provide with this product

Get the cost calculation

01

24/7 Customer support

02

Service center and regional support centers

03

Maintenance and warranty services

04

Выполнение функции Генерального подрядчика

05

Technical and economic evaluation

06

Development of design concepts

07

Разработка проектной (ПД) и рабочей документации (РД)

08

Development of an electronic project for a digital substation (DSP)

09

Preparation of work scope lists

10

Preparation of recommendations for the organization of foundations

11

Factory acceptance tests of equipment

12

Documentation in English and other languages

ELM PS 110 (220) kV consists of:

Outdoor switchgear

Indoor switchgear 110 kV

Oil-filled transformers

Dry-type transformers up to 35 kV

Indoor switchgear 35 kV

Indoor switchgear 6 (10) kV

ELTEMA+ MV Switchgear 35 kV

ELTEMA MV Switchgear 6 (10) kV

ExOnSys DC System

Assol auxiliary switchboard

Energy meter panels

Substation automation panels

Protection relay panels

Monitoring and control systems integrated into Prefabricated substations 10 kV and Low-voltage switchgears

Market-Specific Solutions

25 years of working with Customers from various industries have allowed us to study industry specifics in detail and create individual solutions that fully meet the needs of this industry and the requirements of individual Customers from this industry.
Oil, Gas and Petrochemistry
Generation, Transmission&Distribution of Electrical Energy
Industry&Infrastructure
Renewable energy

News and publications about the product Go to the Media

14 February 2025 News
Electronmash has mastered vacuum packaging technology to protect electrical equipment.

Electronmash specialists are expanding their range of services and introducing a new packaging method for long-term storage and transportation of products in difficult climatic conditions.
22 November 2022 News
Electronmash completed the construction of the Berestovskaya 110 kV substation as a general contractor.

Construction and installation and commissioning of a 110 kV substation was completed as part of a project by NovaWind JSC and Rosseti PJSC to build the 60 MW wind power plant in the Stavropol Territory.
9 June 2021 News
JSC "Electronmash" at the forum of mining industry leaders

On June 1-4, 2021, the XXIX International Specialized Exhibition of Mining Technologies "Coal of Russia and Mining" was held at the Kuzbass Fair exhibition complex, in which Electronmash and Wellenergy jointly participated.
30 June 2020 News
A transformer substation has been shipped for the Taimyr mine of PJSC MMC Norilsk Nickel

Electronmash has manufactured and shipped a complete transformer substation (RP-6) for power supply to the mining facilities of the C-3 and C-4 deposits of the Taimyrsky mine of PJSC MMC Norilsk Nickel.
29 November 2019 News
The II International Conference on Electric Energy Storage Systems has ended

On November 26-27, 2019, the annual international conference "Renewable Generation and Energy Storage Systems. Application experience, technical and economic effects for industrial enterprises".
18 October 2019 News
Factory acceptance tests of the Moscow Refinery Digital Substation have been successfully completed

The specialists of JSC Electronmash, together with representatives of Gazprom Neft, completed the factory acceptance tests of the Digital Substation of the Moscow Refinery.
2 October 2019 News
Equipment was shipped for the Akademicheskaya CHPP (PJSC T Plus)

The specialists of JSC Electronmash have manufactured and shipped a set of electrical equipment to optimize the Yekaterinburg thermal power plant as part of the expansion of the Akademicheskaya CHPP through the construction of additional thermal facilities on its territory.
13 August 2019 News
The factory acceptance of the equipment for the power supply of the 4th technological line of Yamal LNG (PJSC NOVATEK) has been completed

Representatives of PJSC NOVATEK have completed the factory acceptance of equipment manufactured by JSC Electronmash for the power supply of the 4th technological line of the Yamal LNG natural gas liquefaction complex with a capacity of up to 1 million tons of LNG per year in Sabetta.
19 July 2019 News
Happy Metallurgist's Day!

Dear partners and colleagues! Congratulations on Metallurgist's Day!
17 July 2019 News
JSC "Electronmash" at the II International Scientific Conference "Digital Substation. The IEC 61850 standard. Digitalization of electric networks".

From July 2 to July 4 in Moscow, the Electronmash company took part in the II International scientific conference "Digital Substation. The IEC 61850 standard. Digitalization of electric networks", organized by the Scientific and Technical Center of FGC UES (JSC NTC FGC UES) and the Dutch company DNV GL with the support of the National Committees of CIGRE of Russia and the Netherlands.

This may be of interest to you

Catalog

Outdoor switchgear

Substation control room

Indoor switchgear 110 kV

Indoor switchgear 35 kV

Indoor switchgear 6 (10) kV

ELM PS 35 kV
By using this site, you agree to the terms of use policy