ELTEMA MV Switchgear 6 (10) kV
>9825
products manufactured and delivered to Customer sites
Main advantages
Modifications of ELTEMA MV Switchgear 6 (10) kV
-01
ELTEMA MVS 6(10) kV
Rated current of main circuits – up to 4000 A
Short-time withstand current – up to
50 kA
Cabinets with a minimum width of 570 mm provide more connections and reduce the number of prefabricated modular building transport modules
-02
ELTEMA Pro MVS 6(10) kV
Rated current of main circuits – up to 3150 A
Short-time withstand current – up to
40 kA
An integrated truck in each panel of switchgear with a middle arrangement of the withdrawable circuit breaker enables a simultaneous withdrawal of the circuit-breakers from several (or all) panels and service of all switchgears at the same time
Documentation
Get a consultationLicenses and certificates
02
Delivery sites where used ELTEMA MV Switchgear 6 (10) kV
Equipment
Block-type prefabricated substations ELM BPS 35/6 kV with a transformer capacity of 2x16 MVA.
Design, supply of electrical equipment, installation supervision, commissioning and as-built documentation in accordance with the approved technical requirements of the Customer.
Service we provide with this product
Get the cost calculationELTEMA MV Switchgear 6 (10) kV is used:
Market-Specific Solutions
Satisfied customers
about products and cooperation with us
View all feedbacks
Customer's sites: equipment supply for the project "Reconstruction of TP-106A" as part of the program for replacing outdated equipment
Equipment: Eltima Medium Voltage Switchgear (MVS) 6kV
Services: installation and commissioning
There are no compliants on quality and scope of supply, there are no remarks on the operation of the equipment.
Equipment: Eltima Medium Voltage Switchgear (MVS) 6kV
Services: installation and commissioning
There are no compliants on quality and scope of supply, there are no remarks on the operation of the equipment.
">Подробнее
Customer's sites: equipment supply to various power supply facilities since 2006
Equipment: Assol LVS with monitoring system, Eltima MVS 6(10)kV, ELM PS 160-5000 kVA, dry-type transformers with cast insulation, DC switchboards «ELM» and DC panel «ExOn», transfer cabinets, control stations with frequency drives «ELM-ACS», soft start systems.
There are no compliants on quality and scope of supply, there are no remarks on the operation of the equipment.
As part of the construction of the first stage of the South-Western CHPP in St. Petersburg, 88 MVS 6-10 kV "Eltema", manufactured by CJSC "Electronmash," were delivered.
The quality of the supplied cabinets meets all technical standards and is at a high level.
All arising issues during the design, commissioning, and operation phases were efficiently and promptly resolved by the technical services of CJSC "Electronmash."
As of March 2013, all MVS are in operation, with no complaints regarding their performance.
The quality of the supplied cabinets meets all technical standards and is at a high level.
All arising issues during the design, commissioning, and operation phases were efficiently and promptly resolved by the technical services of CJSC "Electronmash."
As of March 2013, all MVS are in operation, with no complaints regarding their performance.
">Подробнее
In 2013, Elektronmash supplied and commissioned Eltema 6 kV switchgear panels, totaling 22 units, for the "Power Plant 2. 6 kV Switchgear Block" project of the extraction company PIT SIBINTEC.
Since commissioning, the Eltema switchgear has been operating reliably. Throughout its operation, no equipment failures have occurred.
We express our gratitude and look forward to further mutually beneficial cooperation. Please keep us informed about the company’s latest developments and proposals for the implementation of modern electrical engineering solutions.
Since commissioning, the Eltema switchgear has been operating reliably. Throughout its operation, no equipment failures have occurred.
We express our gratitude and look forward to further mutually beneficial cooperation. Please keep us informed about the company’s latest developments and proposals for the implementation of modern electrical engineering solutions.
">Подробнее
In 2014, as part of the investment project "Construction of an Ammonia Unit with a Capacity of 2060 Tons per Day" at PJSC "Acron" in Veliky Novgorod, three 6 kV distribution units were supplied and commissioned. The supply included 74 Eltema switchgear panels manufactured by "Electronmash," equipped with Evolis vacuum circuit breakers and Sepam1000+ relay protection and automation (RPA) systems.
The delivery was completed within the agreed contractual deadlines, with no claims regarding quality or completeness. During operation, the Eltema switchgear proved to be convenient for daily use and reliable, fully meeting the operational requirements adopted at our enterprise.
The specialists of PJSC "Acron" highly appreciated the quality of the products and the service provided by the employees of JSC "Electronmash" during the installation of the equipment on-site. The high level of quality, as well as strict adherence to delivery deadlines, allows us to express our appreciation for the productive cooperation and the excellent quality of the supplied equipment.
The delivery was completed within the agreed contractual deadlines, with no claims regarding quality or completeness. During operation, the Eltema switchgear proved to be convenient for daily use and reliable, fully meeting the operational requirements adopted at our enterprise.
The specialists of PJSC "Acron" highly appreciated the quality of the products and the service provided by the employees of JSC "Electronmash" during the installation of the equipment on-site. The high level of quality, as well as strict adherence to delivery deadlines, allows us to express our appreciation for the productive cooperation and the excellent quality of the supplied equipment.
">Подробнее
In 2011, LLC "Quartz – New Technologies" acquired and commissioned the "Eltema" 1250A 6.3kV 16kA Metal-Clad Switchgear (MVS), manufactured by JSC "Electronmash", for the needs of Troitskaya.
The ease of installation and commissioning, operational safety, high reliability of the design, and the included equipment ensure dependable operation while minimizing maintenance costs.
JSC "Electronmash" has established itself as a reliable supplier of high-quality equipment, responsibly fulfilling its contractual obligations. We look forward to further mutually beneficial cooperation.
The ease of installation and commissioning, operational safety, high reliability of the design, and the included equipment ensure dependable operation while minimizing maintenance costs.
JSC "Electronmash" has established itself as a reliable supplier of high-quality equipment, responsibly fulfilling its contractual obligations. We look forward to further mutually beneficial cooperation.
">Подробнее
In 2016, JSC "Electronmash" supplied us with Eltema 6 kV switchgear panels, a complete transformer substation with a capacity of 1250A featuring TS3R07.800 power transformers, Assol low-voltage switchgear panels rated at 1250A, as well as low-voltage switchgear with a soft starter unit for the project "Local Water Block for Deasphalting Units 36/1-1, 36/1-3, 36/3-4 (TP-18)" for the needs of LLC "Gazpromneft-Lubricants," Omsk Lubricants Plant.
Since commissioning, the equipment has been operating properly, and no failures have occurred during operation.
Please accept our sincere appreciation for the productive cooperation and the high quality of the supplied equipment.
Since commissioning, the equipment has been operating properly, and no failures have occurred during operation.
Please accept our sincere appreciation for the productive cooperation and the high quality of the supplied equipment.
">Подробнее
Customer's sites: equipment supply to water unit No. 3 for TANECO JSC
Equipment: Eltima MVS 6 kV, ExOn DC panel
There are no compliants on quality and scope of supply, there are no remarks on the operation of the equipment.
In 2018, JSC "Electronmash" supplied, installed, and commissioned 10 kV MVS panels in a modular building as part of the 10 kV MVS for the reconstruction of the 220/10 kV main step-down substation for JSC "Mikheevsky GOK."
Since commissioning, the supplied equipment has been operating properly. Throughout the entire period of operation, there have been no equipment failures.
We express our gratitude and look forward to further mutually beneficial cooperation. We kindly ask to be kept informed about the company's developments and proposals for the implementation of modern electrical engineering solutions.
Since commissioning, the supplied equipment has been operating properly. Throughout the entire period of operation, there have been no equipment failures.
We express our gratitude and look forward to further mutually beneficial cooperation. We kindly ask to be kept informed about the company's developments and proposals for the implementation of modern electrical engineering solutions.
">Подробнее
In 2018, LLC "Neftekhimmashservice" supplied and commissioned 12 switchgear "Eltema" 6kV series, manufactured by JSC "Elektronmash," for the project: "OJSC 'Novokuybyshevsk Refinery.' Hydrocracking Complex. Combined Acidic Waste Stripping and MDEA Regeneration Unit."
Since commissioning, the equipment has been operating properly. During its entire service period, no equipment failures have occurred.
We express our gratitude and look forward to further mutually beneficial cooperation. We kindly request to be kept informed about the company's developments and proposals for the implementation of modern electrical engineering solutions in production.
Since commissioning, the equipment has been operating properly. During its entire service period, no equipment failures have occurred.
We express our gratitude and look forward to further mutually beneficial cooperation. We kindly request to be kept informed about the company's developments and proposals for the implementation of modern electrical engineering solutions in production.
">Подробнее
LLC "KER-Engineering" carried out construction and installation works as part of the Reconstruction of the "Aromatika" Substation, including Indoor Switchgear 6kV No.1 and No.2, using a temporary 6kV switchgear at JSC "Gazpromneft-ONPZ". During specific stages of the project, products from JSC "Electronmash" were used, including the "Assol" LVS and "Eltema" MVS.
Throughout the project, JSC "Electronmash" provided essential technical support and effectively addressed all technical challenges that arose during the construction phase.
Over the course of our cooperation, JSC "Electronmash" has proven to be a reliable partner, delivering modern, high-quality products in any required volume and strictly on schedule. The use of JSC "Electronmash"'s innovative solutions has facilitated construction and installation work while ensuring an extended operational lifespan for the equipment.
Throughout the project, JSC "Electronmash" provided essential technical support and effectively addressed all technical challenges that arose during the construction phase.
Over the course of our cooperation, JSC "Electronmash" has proven to be a reliable partner, delivering modern, high-quality products in any required volume and strictly on schedule. The use of JSC "Electronmash"'s innovative solutions has facilitated construction and installation work while ensuring an extended operational lifespan for the equipment.
">Подробнее
LLC "Alfa-Diesel" supplied an electrical equipment complex for the 6 kV Indoor Switchgear in a Block-Modular Building (BMB), including 6 kV "Eltema" MVS switchgear cabinets (3150 A), manufactured by LLC "Electronmash Engineering", as part of a project to increase the capacity of the Severo-Danilovskoye oil and gas condensate field operated by JSC "Verkhnechonskneftegaz", a subsidiary of NK "Rosneft".
During the approval process for key technical solutions, LLC "Electronmash Engineering" provided the necessary technical support and timely preparation of design documentation.
All 6 kV Indoor Switchgear in the BMB was manufactured in the shortest possible time and in full compliance with the project's technical requirements. To enhance the reliability of the operating electrical equipment, the 6 kV "Eltema" MVS cabinets were equipped with anti-resonance current transformers NALI-NTZ-6, auxiliary transformers with air-barrier insulation TSKS, and high-speed optical arc protection.
Despite the critical situation with the supply of imported components, LLC "Electronmash Engineering" made every effort to fully and timely fulfill its contractual obligations.
We express our gratitude to the management of LLC "Electronmash Engineering" for their well-coordinated and professional work in preparing the technical solution, the timely production, and the delivery of reliable, high-tech electrical equipment, fully meeting the industry requirements of Rosneft's energy facilities.
During the approval process for key technical solutions, LLC "Electronmash Engineering" provided the necessary technical support and timely preparation of design documentation.
All 6 kV Indoor Switchgear in the BMB was manufactured in the shortest possible time and in full compliance with the project's technical requirements. To enhance the reliability of the operating electrical equipment, the 6 kV "Eltema" MVS cabinets were equipped with anti-resonance current transformers NALI-NTZ-6, auxiliary transformers with air-barrier insulation TSKS, and high-speed optical arc protection.
Despite the critical situation with the supply of imported components, LLC "Electronmash Engineering" made every effort to fully and timely fulfill its contractual obligations.
We express our gratitude to the management of LLC "Electronmash Engineering" for their well-coordinated and professional work in preparing the technical solution, the timely production, and the delivery of reliable, high-tech electrical equipment, fully meeting the industry requirements of Rosneft's energy facilities.
">Подробнее
In 2022, JSC Electronmash performed general contracting services for JSC NovaVind for the Berestovskaya WPP project facilities with a capacity of 60 MW in the Petrovsky District of the Stavropol Territory. 24 wind turbines with a capacity of 2.5 MW each have been installed at the wind farm site, and the planned average annual energy production is 175.5 million kWh.
The company JSC "Electronmash" has completed a full range of works, including: - manufacture and supply of equipment for 110/35 kV substations; - organization of a construction camp, temporary power supply; - vertical layout of the area; - installation of grounding; - foundation work; - landscaping works; installation and commissioning works, including complex commissioning of 110/35 kV substation facilities.
In July 2024, Electronmash Engineering LLC supplied 5 Eltema 10 kV MVS as part of a project to reconstruct a distribution center on the territory of the Oskol Electrometallurgical Plant, and also carried out all the required installation supervision.
The equipment is characterized by reliability and high quality of assembly, which is especially important to ensure the smooth operation of our facilities. From the moment of commissioning to the present, the cells have been operating smoothly, fully meeting our expectations.
The specialists of Electronmash Engineering LLC showed high professionalism, efficiency and attention to detail, which made it possible to meet all deadlines during the project implementation process. We hope for a fruitful continuation of successful cooperation.
